Home

 

Radiators

TECHNICAL INFORMATION

Thermo Tech radiators are produced with ST 12.03 DIN 1543 quality steel:

PANEL RADIATOR 049" Thick Steel
CONVECTORS 0196" Thick Steel
TOP & SIDE COVERS 03" Thick Steel
RADIATOR TEST PRESSURE Min. 188 PSIG
RADIATOR USAGE PRESSURE Max. 174 PSIG
RADIATOR CONNCECTION NIPPLES 4 Pieces G 1/2"
PAINT SPECIFICATIONS Primer Paint: 50 Gloss Brightness
Powder Paint: Epoxy - Polyester
95 Gloss Brightness — RAL 9010

 

ACCESSORIES

Accessories are included with each Thermo Tech Radiator

  • Screws & plugs
  • Wall hangers
  • Stopper G 1/2"
  • Air vent G 1/2"
  • Side covers (mounted onto the panel radiator)
  • Top covers (mounted onto the panel radiator)
  • Manual operating valve and return fittings

IMPORTANT THERMO TECH
INSTALLATION INSTRUCTIONS


1. It is a warranty requirement to use Herz fittings with ThermoTech® panel radiators and towel warmers.
2. All Herz fittings disassemble at union to allow first part of fitting to be screwed into radiator or towel warmer with 1/2" Allen wrench.
3. Wrap threads going into unit with teflon tape and screw into unit securely, but do not over tighten.
4. Screw part two of fitting onto part one already installed.
5. Over tightening of fittings or use of iron pipe with ThermTech® may cause breaks in welds on unit will void the warranty of the product.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12